Product Description

Bondo Fiberglass Repair Kits have everything needed for the do-it-yourselfer, including easy how-to directions, fiberglass resin, liquid hardener, plastic spreader, fiberglass cloth, mixing stick and mixing tray.

---

Product Details

• Amazon Sales Rank: #966 in Automotive
• Brand: 3M
• Model: 422
• Released on: 2011-10-22
• Dimensions: 8.30" h x 11.00" w x 15.88" l, 3.42 pounds

Features

• Includes easy how-to directions, fiberglass resin, liquid hardener, plastic spreader, fiberglass cloth, mixing stick and mixing tray.
• Use for household, automotive and marine repairs, whether resurfacing, rebuilding metal, wood fiberglass or masonry, it will provide a high strength bond and fill.
• This fiberglass repair kit can also be used as a sealer on damaged and rotted wood, works great on large or small metal rust-outs.
• Creates a strong and long lasting bond
• Sandable in less than 2 hours
• Waterproof

---

Customer Reviews

Most helpful customer reviews

11 of 11 people found the following review helpful.
Works like a charm
By Matt
I used this to patch some large cracks in the plastic body of my motorcycle. It is a simple two-part epoxy that you mix up, then cut a patch of glass matting (included) to the size of your repair needs, soak the matting in epoxy, lay it on your clean surface needing repair, paint a little more epoxy over it, let it dry for a few hours. I would highly recommend wearing disposable rubber gloves for this as it is very difficult to get this stuff off your fingers when it starts to dry.

Once it dried, it makes a very strong layer and does exactly what I would expect from the kit. The only reason I rated it 4 stars, is that I don't feel they included enough hardener liquid. I still have half a bottle of epoxy and I'm almost out of hardener.

5 of 5 people found the following review helpful.
Strong stuff!
By Mark Garcia
This resin is perfect for small repairs on hull of fiberglass boat. It's perfect even if you've never used this product before. Make sure you wear latex gloves, because this stuff is not good on your skin. The key for using the resin is quick application. Once you mix the hardener in with resin, you have about 5-7 minutes before resin is stiff, so have the area prepped and ready to apply. The resin gets pretty hot when hardening so don't throw left over in garbage right away as it will melt the garbage bag liner.

5 of 6 people found the following review helpful.
As advertised
By gunner
it is a real good kit and did just what i needed. The fiberglass itself was a little too professional. I would have prefered the cloth type as it is eazier for a novice to work with (also a little more expensive).